50/60 Inch 3-Sided Smart Freestanding Recessed Electric Fireplace with WIFI Remote Control

Caution:

- Before using the electric fireplace, thoroughly read and understand the user manual provided by the manufacturer. It contains important information about installation, operation, and safety precautions specific to your model.

- Do not use the appliance for other than its intended use. It is designed for domestic indoor use only.

- Before connecting the appliance, be sure that the mains voltage available matches that specified on the rating plate, and that the outlet is suitably grounded.

- Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

- WARNING: In order to avoid overheating. do not cover the heater.

- CAUTION: In order to avoid a hazard due to the inadvertent resetting of the thermal cut-out, this appliance must not be supplied through an external switching device, such as a timer, or connected to a circuit that is regularly switched on and off by the utility.

- There may be a trace of odour during the first few minutes of initial use, or after a period of storage. This is normal and will quickly disappear.

- If the glass is damaged, do not use the heater in order to avoid a hazard.

- Avoid the use of an extension cord, as the cord may overheat and cause a risk of fire.

- This fireplace is hot when in use. To avoid burns, do not let bare skin touch any hot surfaces.

- Keep combustible materials, such as furniture, pillows, bedding, papers, clothes and curtains at least 1 metre from the front and sides of this appliance.

Manual Handing:

- The heater must not be moved while in use. Please allow a suitable amount of time for the unit to cool before attempting to move it.

- Be careful. Always use assistance if required.

Care And Maintenance:

- Before cleaning the appliance, the power supply should be disconnected and the unit should be allowed to cool.

- Dust can be removed bu lightly wiping the glass surface with clean, lint free cloth or paper towel. To remove fingerprints or other marks, use a damp cloth with a good quality household glass cleaner. The front glass panel should be completely dried before reusing the heater.